The most common problem with airpods is that they’re too quiet. They’re designed to be completely inaudible, but the technology doesn’t always work as intended. Here’s a quick and easy fix for muffled airpods.
The airpods microphone muffled is a problem that many people have experienced. This article will show you how to fix the issue by using a simple step.
Cleaning your AirPods every three to six months is suggested to preserve excellent sound quality. Cleaning your AirPods will also help them last longer, allowing you to use them for many years!
Cleaning your AirPods should be a routine maintenance procedure, so start there before moving on to other options. The simple methods below will assist you in cleaning your AirPods quickly:
1. Using a Microfiber Cloth, wipe off the outside.
This procedure ensures that the exterior of each unit is clear of loose particles and provides a basic clean. It will also aid in the preparation of the AirPods for a more thorough cleaning, which will be discussed in subsequent stages.
This procedure should be repeated often, even after each usage. It will not harm the AirPods and will help to avoid minor dirt accumulation over time.
2. Make sure the speaker ports are clean.
This procedure will help you clean the crevices and clear the debris from the speakers. Because the indents are tiny and difficult to get inside, it’s critical that you use the proper equipment.
To begin cleaning the crevices, you’ll need the following tools:
- Cloth made of microfiber
- Towel paper
- Cleaner for the screen (such as an optic cleaner for DSLR cameras)
- If you don’t have screen cleaner, use rubbing alcohol (90 percent or higher).
- Compressed air or a tiny air pump (optional).
Once you’ve gathered all of your supplies, you may thoroughly clean your AirPods by following these instructions. You should only use one earbud at a time throughout this procedure.
- On one end of the Q-tip, spray screen cleaner or rubbing alcohol to dissolve the wax and grime that has built up in the crevices. Cleaning the units with rubbing alcohol is also a good idea.
- Spread the cleaner on the grill: Using the Q-tip, apply the cleaner to the black mesh grille on each section of the earphone (there are three of these). Because this is where the sound originates, it will be the most impacted by muck accumulation. Don’t put too much pressure on these places; the grill is only a mesh screen, and it’s sensitive!
- Allow the alcohol to do its work: It just takes a few minutes for the wax and grime accumulation to be softened by the alcohol.
- Remove the buildup with the toothpick: Now is the time to carefully remove the softened buildup from all crevices using the toothpick. To remove the most dirt from the toothpick, wipe it with a paper towel.
- Wipe with a microfiber towel once more: Once you’re confident that all of the buildup has been gone, use your microfiber cloth to remove any remaining particles. Extra cleaning power may be obtained by spraying this cloth with a little screen cleaner or alcohol.
- If you have a compressed air canister or another tiny air spraying equipment, you may use it on the dry earbud to clear dust and debris from behind the grill for a more dramatic appearance. This step is optional, although it has the potential to offer extra benefits.
- Allow them to dry fully: Once you’ve cleaned one unit, ensure sure it’s totally dry before using it. Place them on the table with the big portion of the speaker facing down; this will guarantee that any moisture that has gotten inside migrates outward, preventing damage to the earbud’s inner workings.
- Repeat with the other earbud: Once you’ve done this with both of your AirPods, you’ll notice how much cleaner they are right away. It’s almost as if you’ve got a new pair of shoes!
3. Ensure that the charging case is clean.
You’ve undoubtedly also noticed that the charging case has accumulated a significant amount of grime and pocket lint as a result of regular usage. You’ll want to make sure the case is clean and ready for your freshly cleaned AirPods before putting them back in.
Cleaning the case is identical to cleaning the AirPods; the procedures are as follows:
- Spray screen cleaner on a Q-tip and spread it over the casing where filth or buildup is visible.
- Using a toothpick, remove any extra accumulation. Make careful to get into all of the small gaps where the case was put together, as well as within the mold where the AirPods are kept.
- Wipe with a microfiber cloth; if required, add additional screen cleaning to the cloth. Make sure the casing is completely dry.
- Use compressed air to remove any remaining dirt from the difficult-to-clean areas.
After your AirPods and case have been washed and dried, put them to the test by listening to your favorite music!
Ensure that your Bluetooth connection is stable.
Cleaning your AirPods isn’t always enough to fix the issues you’re having. While this is a necessary maintenance job, there are some further actions you may take to resolve AirPod sound problems.
For short-distance data transfer, Bluetooth technology is utilized. It has a low battery consumption, making it ideal for proprietary and third-party accessories such as Apple’s AirPods.
A distorted or crackly sound is typically the consequence of an unreliable Bluetooth connection. Because this is the only method for AirPods to connect to your smartphone, it’s critical to make sure it’s working properly. If it isn’t, it’s most likely due to Bluetooth interference, particularly if there are other Bluetooth devices in the vicinity.
It’s critical to figure out what’s generating the Bluetooth interference and how to resolve it.
Disable Bluetooth Devices in the Area
In today’s high-tech environment, many of us are likely to be using several Bluetooth devices at the same time, such as printers, speakers, keyboards, or even other wireless headphones. Ensure that these gadgets are switched off or unplugged.
This may not cure all of your problems, but for some people, it has worked like magic to permanently solve the problem! However, if you’ve already attempted this solution or don’t have any additional devices operating, you’ll want to go on to the following step.
Switch Bluetooth on and off.
Bluetooth is a wireless radio band that, like Wi-Fi, may suffer connection issues. Restarting the connection on your iPhone, iPad, or Mac may sometimes solve the problem. To reset your Bluetooth, follow the instructions below:
- Open your phone’s Control Center or your computer’s Menu Bar.
- Turn off Bluetooth completely.
- Count for a minute and a half.
- Turn on Bluetooth once this time has passed.
This patch may be able to help you re-establish your Bluetooth connection in certain situations. If it still doesn’t work, you’ll need to reset your AirPods.
A Reminder about Bluetooth Issues on Macs
Depending on the age and version of your machine, Bluetooth on Macs may be particularly difficult. While most issues with external devices are caused by the item itself, your Mac may also be the source of the problem.
Here are some actions you may take to restore Bluetooth functionality on your Mac:
- Turn the Bluetooth off and on again: As previously said, this is the easiest option and may be a simple repair.
- Remove any USB devices: Apple has indicated in earlier support papers that having USB devices attached to your computer may cause Bluetooth to become unresponsive. Bluetooth problems may sometimes be resolved by removing these items.
- Remove any possibly damaged files: When data becomes corrupted, Bluetooth problems may arise. Even while this is not a frequent occurrence, it does occur sometimes as a result of a system or file problem. However, if this occurs, the simplest solution is to remove the files and allow macOS to generate new ones.
- Reset your Mac’s Bluetooth module: This should be your last option since after this step is completed, you’ll have to reconfigure all of your Bluetooth devices (not just your AirPods).
Check out this iDB article for additional details on how to accomplish the last two steps above.
Restart your AirPods if they haven’t been used in a while
Multiple headphone problems may be resolved by resetting your AirPods. It has allegedly resolved battery problems for early versions, in addition to a possible sound quality improvement. See this iDB page for additional details on how to resolve billing problems.
Keep in mind that after your AirPods have been completely reset, they will need to be repaired to your iPhone, Mac, or another device.
- Reset Using the Setup Button: Press and hold the setup button for a few seconds. This button is located on the AirPods’ backside. This should take around 15 seconds.
- Keep an eye out for a flashing white LED: Your case’s indicator light will turn white first. After then, it will flash amber a few times. It will eventually return to flashing white.
- Pair your AirPods with your device: You may now pair your AirPods with your iPhone, iPad, or Mac again once you see the flashing white light.
- Listen to Something: Once your headphones are connected, try listening to something from your smartphone; if this does not solve your sound problem, you may need to check for updates on your iOS device.
Check for Updates on Your iOS Device
If you’re having trouble connecting to an iPhone, iPad, or iPod, it’s possible that you don’t have the most recent version of iOS loaded. Apple makes significant upgrades to its iOS on a regular basis (about every year or so), which typically come in the form of a new version of its operating software. iOS 13, which was launched in September of this year, is the most recent major iOS upgrade.
If you have an older version of iOS, it is critical that you upgrade your device to guarantee that you are always running the most recent version of iOS; this is particularly important if you use several Apple devices.
As long as your AirPods are linked to a smartphone running the latest iOS, they should always be kept up to date. If you’re worried that this isn’t the case, double-check your iOS version.
To do so on the iPhone, iPod, and iPad, follow these steps:
- Open the Settings app on your phone.
- Go to Settings > General > About to learn more.
- On the About page, the version number is to the right of the Version item.
If your Apple device does not have the most recent version of iOS, you should get a message in your Settings telling you that you need to upgrade. If you don’t have this update, give Apple a call and they’ll be able to assist you with your problem.
Even if you think your AirPods worked well on an older version of iOS, you won’t be able to take advantage of any recent Apple improvements that directly impact your headphones. These updates are typically sent out with the new version of iOS, so if you’re using an older version, you may miss out on this patch.
If you have a jailbroken device or an older device that is no longer supported, upgrading the iOS may be the only option to solve your problem. If an update isn’t feasible, it may be time to replace that old gadget with one that can keep up with you in the near future!
What if the AirPods are still muffled after all this time?
Even after cleaning your AirPods thoroughly and reconnecting to Bluetooth, you may notice that one of them is still louder or muffled than the other. There is one somewhat different suggestion that many people swear by within the Apple and AirPods community.
Sucking on the afflicted AirPod, they say, may help clean up any remaining sound loss. If you’re going to do this with your mouth, make sure you clean it properly beforehand! Also, make sure they’re completely dry before using.
What Should I Do If None of These Solutions Help?
We understand that having excellent sound in your AirPods is critical for people who live a busy lifestyle and are always on the go. If you’re still having problems, it’s time to get help from a specialist.
If you’ve made it this far in the post, you’ve probably already tried all you can to solve your AirPods’ sound problems. To troubleshoot, contact Apple Support or go to your nearest Apple store.
If your device is still under warranty, Apple may be able to repair or replace a faulty item for free or at a reduced fee. Because of the great demand for Apple’s AirPods, obtaining a replacement may be difficult if a new version has just been launched, so be prepared to wait.
https://www.youtube.com/watch?time continue=392&v=910pBpYPO Q&feature=emb logo
The airpods sound muffled after cleaning is a problem that many people experience. There are some steps that can be taken to fix the issue.
Frequently Asked Questions
How do you fix a muffled Airpod on Facetime?
The easiest way to fix a muffled Airpod on Facetime is to turn it off and then back on.
How do I fix bad Airpod sound quality?
This is a common problem with the Airpods. There are two ways to fix this issue. First, try changing your Bluetooth settings on your device. If that doesnt work, then you may need to replace the Airpods or take them in for service.
How do you reset Airpod steps?
If you are having difficulty with your Airpods, try turning them off and on again.
- how to fix muffled airpods mic
- why are my airpods muffled to others
- airpods sound muffled on calls
- airpods sound muffled when speaking
- airpods pro microphone muffled